Re: PB trans behind 383 4-speed engine?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PB trans behind 383 4-speed engine?



Gary,
In a word, no.

I'd check the crankshaft to be sure there are no conversion bushings, bearings, bugs, rust, boogers, snaggers or anything else that might prevent the converter hub from entering the crankshaft register - for peace of mind I'd slide the converter in just for good measure.  In my experience (and I just went out and measured every crank I have) the crankshaft register is around almost 1 13/16" (1.800 on my calipers) on the big blocks - some small blocks had a 1 1/2"-ish register.  Torque converter snout should be a few thousandths under.  As mentioned, slide the converter in just to confirm while everything is out and easy to get at.

You don't mention what Mopar it's going into, so there are a number of accessory issues that might crop up - if you know the year and body style of the car, and what engine and transmission it had originally I can supply more info.

Steve
   

On Monday, April 21, 2014 9:45:07 AM UTC-4, 62to65mopar wrote:
A guy I know has a 1970 383 4 speed. He wants to put the 383 into a Mopar with a 1965 TorqueFlite.
What I recall is about how to put a 4-speed into a Mopar that originally came with an automatic. In this case the opposite is the goal: putting a PB TorqueFlite behind a 383 4-speed engine. Any special issues involved?

Thanks,
Gary H.  

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.