Steering Column Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Steering Column Question



Hey there folks,

I popped off the steering column yesterday.  I drove out the roll pin at the sterering gear, unbolted the firewall and collar bolts from the inside of the car, then gave it a tugaroo to pull it free.  I was surprised to find when I pulled it out that it had become disconnected at the little grease box (not sure of the proper name) and not at the end of the column / at the steering gear.  So I pried-off the end still connected to the gear, and re-attached it to the column by bending the tangs back down on the grease box cover.

Could someone validate this assumption for me:

I am assuming that it is OK to pop it back in, and that the connection under what I am calling the "grease box" will stay connected once the column is re-attached to the gear, and bolted to the firewall?  My assumption is that it cannot move front-to-back once bolted in, so it won't come apart at the "grease box."  Additionally, the little tangs on the grease box are just there to keep the cover on and could not possibly have anyting to do with holding things together.

Does this sound right or do I have an issue?  I would hate for the steering wheel to come off in my hands the first time I put my foot into the stroker.

Thank you,

Jim

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.