Re: 383 Oil Pan Gasket Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 383 Oil Pan Gasket Question



I  always had great luck using Permatex's AV gasket sealer. The stuff is sticky as hell but it works. I even sealed a 1/4 inch crack in the oil pan of my 426 MW with great luck.{late Sat nite and NO stores open on Sun. back then}  :-)
 
Jim
 
 
-----Original Message-----
From: Christopher Kroncke <g2c808@xxxxxxxxx>
To: 1962to1965mopars <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Sat, Jul 19, 2014 2:30 pm
Subject: Re: 383 Oil Pan Gasket Question

Aloha, Permatex Gasket sealer works the best that I've seen. It seems to work even if there's a small amount of oil residue left on block. Well that's what I have found to work best for me. Mahalo C

On Saturday, July 19, 2014 9:18:14 AM UTC-10, Dennis C. wrote:
Hello,

I have had a persistent but small oil leak that appears to be coming from the pan gasket area.

I want to take my best shot at this, I have the pan off,  have a new pan and I am doing this with the engine in the car.  What do you guys recommend for a gasket and gasket sealer. 

Thanks for any and all recommendations.

Dennis C.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.