Re: Carb Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Carb Question



Which Poly 4V intake manifold do you have? These 2 photos will show the difference. The early intake used a WCFB, (red manifold), the later 1962 intake used an AFB, feet extended for the mounting base. Adaptor plates are available for mounting any carb. These adapters will also allow you to raise the carb to match venture size and butterfly valve clearance. Try to use a phenolic spacer and not aluminum to dissipate heat from the manifold to the carb.
 
Nick Tiberio
FuryUs63
 
 

From: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: Carb Question

I was looking at the 4bbl carbs I have, matching up the intake on my 64 Fury, and came across a few AVS and a couple Thermoquads, neither of which have the same bolt pattern that my Poly intake has.  The bolts on the intake are 4.5x5.5, not quite square, but nothing like the AVS or Thermoquad. 
 
I think I have an intake "modifier" to change the bolt pattern (can't find it right now, but isn't that the way it always is) but wonder what the original 4bbl was for an early Poly with the 4.5x5.5 stud pattern?
 
Larry (Akron)


 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: Poly Early 4V.jpg
Description: JPEG image

Attachment: Poly Late 4V - Copy.jpg
Description: JPEG image



Home Back to the Home of the Forward Look Network