Re: Stroker lit up, but I have issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Stroker lit up, but I have issues



The 12 point screws (its not a bolt until you put a nut on it) is for tight spaces where a regular head wont go. In 1972 Chrysler started using a different intake bolt with a nub on the end to line up the intake.  If you bought intake screws for a big block and not a small block, that may be the culprit. The screws are just to short to get proper thread engagement and properly crush the intake gasket.  There is a trick to lining up the intake ports to the cylinder head ports to assure no port mismatch, on a street engine may not matter unless you want that last HP.


On Sunday, September 21, 2014 4:18 PM, Bob <64ragtop@xxxxxxxxxxxxx> wrote:


HHMmmm, There's one for the reference files!  Stripped head bolt(s?) causing leakage under the valve covers, making pinpointing the leak impossible.  I wonder if the ARP bolts not threaded
the full length of the shaft contributed.  I've removed the last few threads and rounded the end of the shaft on bolts to make finding the hole and starting the thread easier.  It seems to work,
especially with long bolts or threaded rod where there's no visibility or guidance.   I've never understood the 12 point bolt heads, except as a way to make us buy sockets with no other use.

BC


On 9/21/2014 1:45 PM, JimJablonski wrote:
Definitely feel like I am on the right track thanks to tons of help.  It will be next Saturday before I get a chance to put it back together - I'll send an update, for sure.

Regarding the intake bolts, we might want to file this one in the lessons-learned bank.  I purchased/installed ARP part # 144-2101 named "Bolts, Intake Manifold, Chromoly, Black Oxide, 12-Point Head, Chrysler, Big Block, Kit."

Take a look at them compared to the 3/8-16 x 1 3/4 bolts from the hardware store (attached).  Let's not even bring up that the ARP bolts were $36 and I got out of the hardware store for I think $11, including the Snickers bar I chomped on the way home given the wife wasn't with me.






On Sunday, September 21, 2014 11:05:44 AM UTC-4, carv...@xxxxxxx wrote:
Way to go Jim!  I have to go out in the garage now and check the bolts for my new intake!...... 

What great interaction! Just a bunch of well wishers trying to help one of their own. 

Lyle

On Sunday, September 14, 2014 5:33:07 PM UTC-4, JimJablonski wrote:
Well. I finally got the stroker to light up, but I've got some issues.  I hope it's not serious, but it doesn't sound good.  I had to advance the timing to about 50 degrees to get it to start, and after break-in, I can't get it to idle below about 1,800 RPM.  And there is an obvious miss when you kick the throttle.  My 1st thought on the idle was a vacuum leak, but I ran some propane around the intake and nothing happened.  The timing and the miss have me concerned.  Could I have possibly screwed up the timing chain marks?  Any thoughts?

The good news is I have awesome oil pressue and no leaks.  It sounds freaking wicked.  Here's a video:



Thanks,

Jim
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.