Re: 426W Prices: was ex-member Don D.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 426W Prices: was ex-member Don D.



I do believe that a 440 has a higher market value than a 426W. If I was truly in the market for a 426W, I'd expect to pay around $1,500 for a rebuildable assembly - seen some priced at that value at Carlisle over the last few years. I am concerned that the condition of the 426W that Jason is considering is of an unknown condition, hence the starting value of $1,000. 

For the record, the rebuild on my 440 with the addition of Eagle Rods and Icon forged pistons came to $3,500 this spring.
 
Akron Don Gallimore
From: Cory Rempel <cory_383@xxxxxxxxxxx>
To: "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Tuesday, September 30, 2014 8:08 AM
Subject: RE: ex-member Don D.

Just gonna throw my two cents in here, even though I haven't read the whole thread.  $1000 for a 426 seems a bit on the cheap side.  my buddy had his 440 rebuilt with new pistons, rings, shaved heads ad a cam I gave him.  That build cost him between $3300 and $3500 up here in Saskatoon Canada.  He also knew the guy a bit who did it so he might have gotten a bit of a deal, I don't know.  I'm also not sure about the job rate comparison from here to the US.  It's our experience, up here anyways, that any running 440 is worth a minimum of $2000, no matter the year.  Again, my opinion from a different part of the world.

 

From: Jason@xxxxxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Date: Tue, 30 Sep 2014 06:07:42 -0400
Subject: Re: ex-member Don D.

Thanks it's a trade deal and hoping to end u with it
Jason 

Sent from my iPhone

On Sep 30, 2014, at 6:04 AM, Donald Gallimore <dongallimore@xxxxxxx> wrote:

for a 65 426W, If you are looking to sell, my opinion it ts worth over $1,000 if it can be salvaged to run another day. Would love to have it but the other 65's I have are sucking all my parts money and more.
 
Akron Don Gallimore

From: Jason Rhoades <Jason@xxxxxxxxxxxxx>
To: "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Monday, September 29, 2014 8:59 PM
Subject: Re: ex-member Don D.

Quick question
What's a 65 426 wedge with 516 heads barn find ran when pulled out but stuck from sitting worth

Jason

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network