RE: New Poly Intake Recipients - CHIME IN!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: New Poly Intake Recipients - CHIME IN!



Bruce is starting with a stock 2bbl…stock exhaust manifolds and stock y pipe-doing a baseline pull… adding the new Poly SS-X Deep Freeze manifold-another pull… adding tti headers another pull… That will be our baseline… He then is building one of his MAX strokers and will be testing that later in the winter… but his initial testing using the DEEP FREEZE coated intake should fairly well replicate what the average Poly owner can expect by bolting on this manifold…  The significance of the Deep Freeze coatings options shouldn’t skew the numbers significantly and we have so few manifolds yet that we sent him the deep freeze one and the normal uncoated  wind tunnels to long time patient contributors…

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Bill Paxton
Sent: Friday, October 03, 2014 11:47 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: RE: New Poly Intake Recipients - CHIME IN!

 

                Will there be dyno testing done on a stock poly also, not just a highly modified stroker?

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Roland Osborne
Sent: Friday, October 03, 2014 12:34 PM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: RE: New Poly Intake Recipients - CHIME IN!

 

JC Childress at Kowalski Racing has built a Poly Stroker and will be dynoing his maybe even sooner than Bruce… stay tuned..

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Hall, Ricky L
Sent: Friday, October 03, 2014 11:31 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: RE: New Poly Intake Recipients - CHIME IN!

 

Looking forward to hearing how the dyno goes for Bruce at Toth Performance in PA.......... ; )

 

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Roland Osborne
Sent: Friday, October 03, 2014 9:21 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: RE: New Poly Intake Recipients - CHIME IN!

 

Just got word from the foundry yesterday that there are 20 more manifolds at the machine shop… means I’ll be making another run next week to CA and pick them up for shipping with enough valve covers to fill ALL valve cover orders… Feedback so far is that a gentleman from Canada got his manifold and polished Poly SS-X valve covers with packaging totally thrashed in shipping but minor scratches on the valve covers easily polished out…  We’ll beef up our shipping containers and probably ship valve covers separate from manifolds from here on…

Dan Jaynes- WOW!!! Got it yesterday....gorgeous....beautiful....wonder what it looks like in black polished?   Will try to get it on this weekend. 

Bruce Toth- Roland good news I got home and my intake and valve covers were here they look great you really out did yourself.

Dave Antonucci…Hi Roland, pics attached of the off center mounting bores. I have the loose pipe thread bores also. We still having Dave reviewing the bolt holes relationship to the ports believing that a very minor core shift caused one bolt boss to be undercut… and for all who do get these manifolds, the ports are made about .250” wider than the original factory Poly ports ergo there is some over/undercutting experienced for bolt clearance and a special socket (allen) head bolt set is required…(That’s how we got such a huge increase in performance…) Regarding the  loose pipe thread holes-water and vacuum taps-, if a quality pipe thread tape is used it is a non-issue…

Can’t wait to get yours coming at you Bill (as well as everybody else!!!)

 

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Bill M
Sent: Friday, October 03, 2014 10:53 AM
To: mml@xxxxxxxxxxxxxx; 62-65 Mopar List
Subject: New Poly Intake Recipients - CHIME IN!

 

Who out there has received their manifold? Any thoughts, opinions, or reviews?

I'm patiently awaiting mine.


Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.