Fw: B body throttle cables? 1965 Dodge Coronet

["Gary H." <62to65mopar@xxxxxxxxxxx>]

I'm passing along this question that went to another email address. Can anyone help Mark?

>  -------Original Message-------
>  >  Dear fellow Mopar lovers, I need some help. I have been working on my
>  >  daughters 65 Coronet 500 and have run into a problem with finding the
>  >  correct length throttle cable. The engine is a 440 with an Edelbrock
>  >  Performer intake manifold and Holley 750 with vacuum secondaries. We
>  >  currently have the Lokar throttle and kick down cables. I have been slowly
>  >  collecting the parts (with assistance from some of you. thanks). I have all
>  >  the parts I need ? and am ready to install the parts. I have checked on
>  >  line with many vendors for our cars. They have been very helpful but so far
>  >  I have not found the correct size throttle cable. Does anybody know the
>  >  length or could measure the one they have I would appreciate it. All the
>  >  ones I have found so far are too long. Everything from 27 to 22  inches are
>  >  available.  I have a four barrel cable on my 64 Fury. without removing it
>  >  it looks like the housing itself is only 13 1/2 in. or so long. A spare
>  >  cable I have measures at 13 7/8 in. from clevis end to clevis end and the
>  >  housing itself from the pointed end where the cable attaches to the
>  >  manifold bracket to the round end that attaches to the accel. pedal is 20
>  >  1/4 in. I just received a cable from Atlas Obsolete Mopar parts. Melissa at
>  >  Atlas was very helpful and provided good info. The cable I received is 21
>  >  3/4 in long clevis end to end and the housing is  15 in. Several companies
>  >  offer custom length cables but I hope someone offers stock length cables.
>  >  Thanks for your help and time. Mark C.  

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/d/optout.