Re: 63 shifter cable for push button tranz.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 63 shifter cable for push button tranz.



Use heat shrink tubing like eBay # 370412333604 to cover the affected areas, put a small bead of silicone seal in each end of the tube before you shrink it..  While you have it apart look at eBay # 221579021201 to protect your cable into the future. 
Also, was it burned, by the exhaust?  If you have bad engine to body grounds, the starting system can use your shift cable as a ground (electrons use the path of least resistance) causing hot spots melting your cable from the inside out.  Just something too think about!
 
 
 
 
-------Original Message-------
 
Date: 10/24/2014 12:45:17 AM
Subject: 63 shifter cable for push button tranz.
 
 Aloha Good People, I am looking for the shifter cable for my 1963 Plymouth that goes from the push button switches to the transmission valve body. My cable got melted against the exhaust pipe before I bought the car and seems to be leaking tranny oil.   If anybody might know where I might find one , I would be grateful. Mahalo C

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.
 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network