Re: Heater Woes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Heater Woes



You could check flow by removing the return hose, blocking the fitting it came off and placing the house end in a bucket. Then fire it up and test for. It should just take you a second to see if it flows and you can shut off the valve to see if it's working.

On Dec 28, 2014 11:31 AM, "Bill M" <y1topbanana73@xxxxxxxxx> wrote:
I thought about that but the heater core only had 2 seasons on it and was clean & working fine when removed.

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

On Sun, Dec 28, 2014 at 11:52 AM, Ollie <satellite1965@xxxxxxxxxxx> wrote:

plugged up heater core
Ollie
 
From: Bill M
Sent: Sunday, December 28, 2014 10:47 AM
Subject: Heater Woes
 
After ~2 years, I finally got around to solving my leaking heater control valve, and then re-installing the box. After getting everything hooked up, I still have no heat. I've confirmed that both hoses get hot, and the valve is operational. I've been through several hot/cold cycles. My next step is to drain the system down and make sure I'm getting flow through the heater hoses and/or that I don't have air in the heater core.

Anything else I should check? I'm thinking it's gotta to be something stupid. The system is simple and should just work.

Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 06 Mazda 3

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network