Re: New radiator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New radiator



Here is the information on the US Radiator

4-row
14 fins per inch (approximately)
rows on 3/8" centers (approximately)

My original radiator that was re-cored from 2-row to 3 row

3-row
10 fins per inch (approximately)
rows on 1/2" centers (approximately)

The difference is huge, the are less rows in the re-cored radiator and there are fewer fins.

I have close-up pictures of each core if anyone wants to see them but I did not want to put large pictures in the this post.

Dennis C.

On Tuesday, February 10, 2015 at 9:45:29 AM UTC-7, Paul L. http://1962to1965mopar.ornocar.org/ml-le wrote:
Dennis, I remember you telling us previously what the fin count is on your new radiator.  Could you please remind us what that number is.

Paul L.

On Tuesday, February 3, 2015 at 8:08:27 AM UTC-6, Plucked Chicken wrote:

Received last night and real happy with the quality.  Back ordered from Classic Industries on Dec 21st during one of their 20% off sales.  So a little over a month to get the back-order.  They honor the discount at the time the order was placed, and don’t charge your card until it ships.  Plan to order the floor pan the same way, when the time comes.

 

Go to http://www.usradiator.com/ and watch the 12 minute factory tour video, to see especially the copper radiator process.  At about 11 minutes in they discuss the aluminum cores.  I went with US Radiator because of the formed tanks - stock appearance with less welded seams - and American made to boot.  Most def going to add some bling under the hood.  ; )

 

“Desert Cooler” aluminum 2 rows 1” tubes 14-16 fins per inch   (Classic Industries MB2352A – US Radiator AL035037ANDZ)

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network