Re: Front Drag Wheels Backspacing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Front Drag Wheels Backspacing



don,

on the front:
wheel: weld classic RT, aluminum, polished, 15 in. x 4 in., 5 x 4.50 in. bolt circle, 1.50 in. backspace,
tire: moroso drag special front, 29.2 x 7.6-15, bias-ply, blackwall

i don't think my rear wheel / tire combo will work on your car.

mike



On Wed, Mar 11, 2015 at 5:30 AM, Donald Gallimore <dongallimore@xxxxxxx> wrote:
What backspacing and tires are you using on your drag cars?

I've got a drag raced '65 Belvedere and want to buy a skinny tire and wheel for it.  They have a number of backspacing and I don't know what is advisable for backspacing.

(PS - anyone got wheels and/or tires they want to sell - located in Akron, Ohio 44313.  Would prefer Weld and M/T due to contingency money. For the back, I'd need a 5" backspacing on a 8" wide by 15 wheel, if you've got that.)
 
Akron Don Gallimore

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network