RE: Enquiry thomas Kick-down linkage for Poly manifold

["Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx>]

Thomas,

 

Not sure if this is going to you direct, but hopefully it gets forwarded to you.  We are far from “stuck” for kick-down linkage.

 

Most Mopar like would be the Bouchillon hardware.  My ’62 Dart wagon has a round hole thru the firewall for the throttle cable, so your ’62 Fury must be the same.  To remove just the throttle cable, there is a C-shaped keeper under the dash.  Or remove (4) bolts to remove the pedal linkage and cable mount.

 

http://www.bperacing.com/trans_kickdown_cables

 

http://www.bperacing.com/accelerator_cables

 

 

I chose the Lokar aluminum carb bracket and black cables.  Lokar throttle cable TC-1000U / Bracket TCB-40DQ / Tranny kick-down cable KD-2727U

 

I just like the looks and simplicity of Lokar.  While engne is out for rebuild, been mocking up the manifold.  I mounted the Lokar throttle cable the other day thru the firewall.  Was very straight forward even though not a Mopar specific throttle cable.

 

Ric

 

From: Roland Osborne [mailto:roland@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, April 07, 2015 7:31 AM
To: 'Tammy Maxey'
Cc: Hall, Ricky L; Bill M
Subject: RE: Enquiry thomas

 

1962to1965mopars@xxxxxxxxxxxxxxxx  has all the install NEWS weather and sports covered for this swap… also Bill Maurits and Ricky L Hall (ricky.l.hall@xxxxxxxxxx) are deeply immersed in the project and hopefully will do a complete ‘laundry list’ of all the nuances???

 

From: Tammy Maxey [mailto:tammy@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, April 07, 2015 5:10 AM
To: Roland Osborne
Subject: Fwd: Enquiry thomas

 

📌 Tammy/Chrysler Power -------- Forwarded message -------- From: thomas To: admin@xxxxxxxxxxxxxxxxx Date: Sunday, April 5, 2015, 2:07 PM -0400 Subject: Enquiry thomas Yes... Now I have the ssx intake for my 318 poly (62 fury), howze about getting us the right kickdown linkage? Seems we are stuck ,here, and many with stock 2bbls just don't want to move til that is no longer an issue.... Thank you, Thos

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: Poly 001.JPG
Description: Poly 001.JPG

Attachment: 3-8 037.JPG
Description: 3-8 037.JPG

Attachment: Poly 003.JPG
Description: Poly 003.JPG