360 POLY Project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

360 POLY Project



WE NEED set of stock 360 rods… The beauty of the Mopar engine platforms is their rather extensive interchangeability… We are researching modern day, easy and economical parts to obtain to build your own unique variation on the POLY platform… The current project is a 360 crank cut down to 318 mains using Speed Pro HyperEutectic pistons ($225/set) for std bore 360… makes the POLY block 4.000” at .090” over… and 360 cubic inch… For around $500 you can have a light weight bottom end 360 POLY!!! We just don’t have a set of stock 360 rods laying around… anyone can help us??? (Need the 360 rods as they are a press pin while the POLY rods are full floating-the econo Speed Pro pistons are for press pin rods…)  off list contact info roland@xxxxxxxxxxxxxxxxx

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network