Re: confused alternator installer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: confused alternator installer



Neal...the triangle bracket is correct for '67...the one with the di[pstick hole is '66 and earlier. Here's a pic of my stock '67 setup....hope it helps...
 
Darwin
Victoria BC Canada
----- Original Message -----
Sent: Sunday, July 31, 2016 9:15 PM
Subject: confused alternator installer

Any body have any real good photos close up showing the proper alternator bracketry set up for an LA small block. Mine has the early iron water pump not the 1970-up gattling gun looking pump. My 340 had some cobbled together  homemade nightmare for an alternator bracket. I dug out my  LA engine bracket setups, and 4 the life of me I cannot figure it out. all the adjustment arms wont quite reach, they seem about an inch too short. For the alernator hanger i have a setup from my old blown up 1967 273  (with the hole in the middle the dipstick comes up through) and  a triangular plate type with 3 holes. Of course I have lost all the spacer tubes for the long bolt going thru the alternator. I can't figure it out.
 neal zimmerman, eugene oregon

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.



Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: IMG_1984.JPG
Description: JPEG image



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.