Re: cooling system questions, what are u guys using

[<62-65-mail-list-club@xxxxxxxxxxx>]

Here's what that radiator cap  page referenced in the link states: 

"A cooling system in proper repair will not suffer under the pressure load it is designed for; go ahead and use the 13 to 16 pound cap the system is designed to use. "  13 refers to non-AC cars; 16 to AC cars.

I figured your radiator system was rebuilt, so went with what the Chrysler engineers specified.

Use a 12 if that floats the boat for you and the radiator guy. 

Gary H. 

>  -------Original Message-------

>  To: 1962to1965mopars
>  
>  as to the cap he actually said 10 (OR) 12. he said 16 was too high on
>  a recore with 50 year old tanks.
>  
>  On Wed, Aug 3, 2016 at 7:20 AM,  
>  wrote:
>  
>  > 10 is too low. Use a partial-pressure cap. 13 at least.
>  >...

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.