RE: Pistons for 440 crossram wedge
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Pistons for 440 crossram wedge



.100 down in the bore???   That’s like 8:1 territory.  How big is the cam?  Should be street able on 87 pump gas.  
jason

-----Original Message-----
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of PallCon Services
Sent: Friday, October 14, 2016 7:21 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Pistons for 440 crossram wedge

I am finally after 3 years getting my 62 Belvedere back from Chris Cline Racing on Monday.
Mostly modified the straight axle, finished roll cage, new Lexan windows and fabricated new guts in the doors for roll up windows, headers with cut-outs and set up chassis for the strip etc. No power train changes.
I have a reverse pattern 727 with 4:30 gears and the engine was rebuilt 3 years ago with purple cam, New Holley 2x4 crossram with Edelbrock Aluminum Heads, but the guy who did the engine work left stock pistons which I am told are .100 below deck.
Only item left is what brand and compression pistons I should consider.
I would like to do occasional car show and maybe 4-6 outings at 1/8 or 1/4 mile drags.(I need to split time at strip with my 65 Coronet Hemi).
Anyone with piston experience and suggestions ? Criteria?

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.