Re: More uses for a 318 "Poly" head
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: More uses for a 318 "Poly" head



That's what I call Redneck Engineering!

Merry Christmas!

Bill Maurits 

On Dec 10, 2016 6:05 PM, <glpavlovich@xxxxxxx> wrote:
I found more uses for a Poly head when not making power on the engine.  Had to remove the old seat belt fasteners from my Plymouth and the years of undercoat & gunk made it more than difficult to remove with myself alone.  You have to be in the cab to wrench the 7/16” fine thread bolt while somehow securing the nut underneath the vehicle from turning as you apply torque to unfasten...hmmm, I attached a vise grip to the bolt head in the cab and stuck the protruding handle into one of the intake ports on my spare R&D Poly “head”.  Poly heads are not known for their svelteness and secured the vise grip handle sufficiently allowing me to ratchet the bolt from underneath the car w/o spinning the bolt; voila, success.  Although I did have to use a die to remove the “road experience” before the ratchet experience would be fruitful.
 
Merry Christmas to all!
Gary Pavlovich

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network