Re: Brake parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Brake parts



Paul, Be sure to bleed the master cylinder on the bench.  instead of on the car( like I did)  Make real sure the brake push rod is not to long. I don't recall , do you have fron disc? I do, and had a heck of a time getting the front calipers completely bled.  I couldn.t get the M/C to stop with the air bubbles  coming back into it.  I recommend gravity bleed on the brake cylinders.  I got so PO ed at mine , I quit on it and a few days later , all the brakes worked fine!!!!............................MOI

On Saturday, January 21, 2017 at 1:45:41 PM UTC-6, Paul L. http://1962to1965mopar.ornocar.org/ml-le wrote:
I purchased the one Gary referenced (in this thread) from Rock Auto.  It came a couple days ago, haven't done anything with it yet.  But it is a Raybestos brand, cast iron and looks to be good quality.  I'm also going to replace all of the rubber brake hoses while I'm at it.  I'll be working on it this winter as the weather allows.

Paul L.

On Sunday, January 15, 2017 at 10:01:30 PM UTC-6, Doug J wrote:
Wondering what those of you that have changed brake master cylinder and wheel cylinders have used lately ?  Going to a dual reservoir master.  Prefer new manufacture and made in the USA.  What brand and where did you get them ?
Thanks

Doug
63 Sport Fury ragtop

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.