Re: Interior Wire Harness ^% B Bodys

Rich,

I've reached a point where for safety and reliability I need to consider rewiring the dash and engine compartment at a minimum.

I've looked at Ron Francis kits. The AC-68, BB-68 and WR-95 range from an everything kit to much more minimal I would be interested in the level of kit you installed.

What did you do at the bulkhead connector? I've considered drilling it out and passing the wires through or completely eliminating it and just installing a grommet in it's location.

Thanks
Dennis C.

On Saturday, January 28, 2017 at 2:59:43 PM UTC-7, LeRoar wrote:

I used a Ron Francis kit. It worked well but it requires a good set of diagrams and some Kentucky windage to get it right. Especially for the dash wiring. The wires are there but you have to figure out some connectors for a few items. I love the fuseblock!! It is compact and very comprehensive. I found it fit great behind the brake pedal on the interior firewall. Real easy to access but out of harms way.

Rich Kinsley '64 Dodge Polara 4dr LeRoar 318 poly w/goodies

On Sat, Jan 28, 2017 at 3:30 PM, Donald Gallimore <dongal...@xxxxxxx> wrote:
I got the engine and front light harness for both my '65 Belvedere and '65 Satellite from Evans. Nice work.

Akron Don Gallimore

From: "carv...@xxxxxxx" <carv...@xxxxxxx>
To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to19...@googlegroups.com>
Sent: Saturday, January 28, 2017 12:59 PM
Subject: Re: Interior Wire Harness ^% B Bodys

Hi Jim

You might want to check out Evans Wiring in Erie, PA. Mopar only!
I had my '63 Sport Fury re-wired by a resto shop last year and I mentioned Evans and that's who he uses all the time.
They have a web site.

Good luck!
Lyle

On Saturday, January 28, 2017 at 11:30:17 AM UTC-5, dodg...@xxxxxxx wrote:
Hello Mopar Heads,

I have been re-adjusting the garage after all the distractions of the last five months of 2016 in Low Country, SC.

I found several Mopar catalogs from about 1965 - 1978 and the first publication, 5 page thick material, put out by the “Ramchargers” when they went into the engine building business as a Corp.

The Hustle Stuff Catalog and others have a lot of Parts Numbers. If anyone needs assistance in a HP Part # let me know and I will see if the literature I have can help. Direct contact is ok too.

My question is I found a reference to M&H Electric Fabricators Mopar Wiring Harness for 1964 and up Mopars.

Has anyone used their products?

Any comments would be appreciated.

Jim

Coronet 500 440CI

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies