Re: 413 Dual Street Wedge on Dyno
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 413 Dual Street Wedge on Dyno



Very interesting to me.. I have a 413 that I would like to build. set up similar to this, but with a 750 Holley, Eddy RPM performer, and 516 heads  with larger exhaust valves.  What heads are these  you have?..........................MO

On Saturday, February 25, 2017 at 10:53:11 AM UTC-6, Mark Evans wrote:
Spent yesterday running The 413 for the 62 SFury with dual Carter's on the Dyno
Ran 400 hp with the Dyno headers no air cleaners. 376 hp with the stock manifolds and air cleaners and pump fuel
Has 9.3 compression. Bored to 425 ci  and 1.72 exhaust valves, mopar purple Roadrunner cam
Mark


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network