Re: front suspension
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: front suspension



I also used PST and went with the poly/graphite. You can borrow most of the tools from O'Reilly and others. But if you break it you buy it. I may have the big socket??

My stepson had helped me and it was done in a few days. We also did the disc brake conversion. Oh yes and we replaced the torsion bars.

Let me know if I can help you with something.

Rich Kinsley

On Apr 6, 2017 9:35 PM, "Doug J" <63sprtfury@xxxxxxxxx> wrote:
I got my parts from Performance Suspension Technology (PST) .  That was EVERYTHING except the pitman.  More expensive than Rock Auto, but better stuff IMO.   For an old guy (like me), it's a bunch of work from jack stands.  I also did the steering chuck, and let me tell you getting the pitman arm off is a bitch.  Broke 4 pullers in the process.  Pitman might not be necessary for your situation though.  It was a winter job for the full suspension, another winter for the chuck, pitman and coupler rebuild. (a couple nights a week, couple hours on saturdays, my back won't allow a full assault... LOL )  Very worth it in the end.  If you have the time and patience do it yourself.   Figure on buying some tools to go with the parts.

Doug
63 Sport Fury ragtop

On Thu, Apr 6, 2017 at 9:16 PM, <62-65-mail-list-club@ornocar.org> wrote:
DIY if you have the time and place to do the work. You may have to buy or rent a socket that fits the ball joint that
unscrews; (use a long breaker bar).

Gary H.

>  -------Original Message-------

>  I took my 63 to the shop today for a front end alignment.  I had
>  turned up the torsion bars for  more ground clearance.  Well they told
>  me I need new ball joints upper and lower and new tie rod ends, plus a
>  radius arm bushing (?).  They estimated the job at $1200.  I'm
>  thinking I can do most of the work myself and save $$$$.  I've priced
>  the parts on Rock Auto and they are probably less than $200.  Any
>  pitfalls in doing this work?
>
>  Paul L.
>

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.