Re: Commando 273 Valve Cover Restoration
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Commando 273 Valve Cover Restoration



Also, 3M makes a "General Purpose Adhesive Cleaner" p/n 08984 that works great to soften up adhesive.  But I've had good luck using a heat gun too as mentioned before.  (Don't think I'd use the two together though, might lose some eyebrows)

Paul L.

On Sunday, May 7, 2017 at 11:10:32 PM UTC-5, ddavids wrote:
I need to restore the valve covers on a 1965 Commando small block. This is the 4bbl version of the 273 V8, with higher output rated at 235hp.
Mopar differentiated it visually from the 2bbl using black crinkle painted valve covers, with aluminum fins on the top.

I want to remove the fins, but can't figure out how they're held on. Absolutely nothing shows on the underside fo the cover. No spot weld evidence, nothing.
How are these affixed and how do you remove them? I don't want to pry on an aluminum extrusion.

Dan
Seattle


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.