Re: 1965 trunk lock cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 1965 trunk lock cylinder



You got the right answer on the lock.

On the HP, just make sure the chassis is reinforced to handle the power or you'll crinkle the body. (I think you've done this but just in case...)
 
Akron Don Gallimore



From: PallCon Services <pallconservices@xxxxxxxxx>
To: "1962to1965mopars@xxxxxxxxxxxxxxxx" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Monday, July 31, 2017 4:39 PM
Subject: 1965 trunk lock cylinder

The trunk lock cylinder broke on my 1965 Coronet.
I just bought a replacement kit that comes with the cylinder, keys, retainer clip, and several various lengths of engagement rods.
I am guessing it is an easy fix but would appreciate any tips before I start as I value others experience.
This and a leaky rear main seal are the last items to fix. I Did a first street run this week and the 528 Hemi is very impressive. Feels like Low 10's or high 9's may be possible.😳
I never had a car pull so straight 😄
David
David E. Blosser
239-293-4885
1169 Laurel Ridge Drive
Waynesville, NC 28786
12440 Lake Jovita Blvd
Dade City, FL 33525

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.