Re: MAD electrical upgrade
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MAD electrical upgrade



No,

The electrical system will work just fine and not over charge the battery due to bypassing the ammeter.

Dennis C.

On Sunday, August 13, 2017 at 7:45:55 PM UTC-7, neal wrote:
I heard somebody say the downside to the ammeter bypass modification  is it throws off the voltage regulator and causes it to "overvolt". Any truth?
neal

On Sun, Aug 13, 2017 at 1:36 PM, <glpav...@xxxxxxx> wrote:
I am using MAD’s electrical products and wiring diagrams for trunk mounted battery install w/remote solenoid, two forward power distribution terminals...etc...and I have modified some of his instructions to fit my Plymouth/Mopar needs.  Very good tutorial and excellent products.  Bypassing/not using the AMP meter in/on the dash is vital to prevent current drop and excess voltage/amperage from burning dash wires and degrading your system.
Gary P.
 
 
Sent: Saturday, August 12, 2017 7:15 AM
Subject: Re: MAD electrical upgrade
 
I've used Mad's electrical wiring system for the last 3 cars I've built.  His designs are sound and simplify things quite a bit.  The only drawback on a "restoration" is that if you go with Mad's wiring system you won't have "Mopar" designed wiring.... which some purists may find unacceptable.  As far as I'm concerned... his designs are easier to understand, safer, and simpler to install (providing you're not using an expensive per-manufactured replacement wiring harness).

Bill

On Saturday, August 12, 2017 at 2:56:18 AM UTC-5, neal wrote:
Has anybody heard of the MAD electrical upgrade  to bypass factory ammeter. (www.madelectrical.com)  . They have numerous articles but this one caught my eye.  Basically running juice from alternator directly to starter relay instead of  through firewall connector and all up through the dash. You fuse the thick red and black wires where factory ammeter used to sit. You still need this loop to feed ignition switch, etc. This loop is also attached to starter relay. They also by pass the fragile firewall connector for these two wires.  Supposed to reduce risk of melt down greatly.  And of course then you need to install an aftermarket voltmeter in place of the now absent factory ammeter..
MAD isn't  just Mopar  but this upgrade is specifically  for Mopar. They do it on a 79 Dodge truck but it should work on the older stuff too.
    neal
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.