RE: Floor Pan Replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Floor Pan Replacement



Yes AMD thru Summit Racing.............

 

Desert Valley does look like a great parts source – I see they have a complete ’62 Dart grill..................

 

https://www.dvap.com/

 

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Bill M
Sent: Tuesday, September 19, 2017 6:22 AM
To: 62-65 Mopar List <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: RE: Floor Pan Replacement

 

Ricky,

 

It it an AMD panel from summit? Might want to call Desert Valley.

 

On Sep 19, 2017 9:18 AM, "Hall, Ricky L" <ricky.l.hall@xxxxxxxxxx> wrote:

Got my work cut out for me.........  ; )  Somehow I imagined this being stamped in America - nope - made in Taiwan.  Sure is light - can pick up the panel with a gloved finger in two drain holes...........  20 gage (.036)

Did make new bench seat brkts mounts last night, for 3" more leg room.  With them set at the max 2" back OEM setting, that's a possible 5" back from the fwd most OEM setting.  All bolted to the adjusting sliders and will try the bench seat in the wagon tonight if we get a break the rain.  First real rain we have had in months - that's saying something for Seattle...........

-----Original Message-----
From: 1962to1965mopars@xxxxxxxxxxxxxxxx [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of 62-65-mail-list-club@xxxxxxxxxxx
Sent: Monday, September 18, 2017 7:53 AM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: Floor Pan Replacement

There used to be several articles online at Mopar Action with floor replacement tips. Maybe not now, so take a look at this article. 1967 Plymouth, but still a B-body.
http://www.hotrod.com/articles/1967-plymouth-belvedere-how-to-replace-the-floor-in-a-classic-mopar/

Not sure about the seat question. The "keep it simple" rule leans toward rebuilding the bench seat. But I'm sure adding bucket is doable with enough custom fab.

Thanks.
Gary H.

>  -------Original Message-------

>  Anyone have tips on floor pan replacement? Have a new pan coming
> today  via FedEx truck freight from Summit Racing. Pulled out the
> front seat  and carpet on the weekend to see how to mount bucket seats.......
>  Looking like she needs the rear two sections they sell too, as you
> can  see thru in the right rear foot area.
>
>  On that note - I don't see fitting bucket seats in place of the bench
> seat very easily. The floor contour makes it 1 ½" or so higher where
> the inside tracks would go. And there are no braces underneath for
> mounting the inside tracks. The bench straddles all that. Think I am
> back to having the bench upholstered with lumbar support.



--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.