Re: 62 Polara 741 rear end
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 62 Polara 741 rear end



I went a little crazy on my 63, I stuffed an A body under mine . it was oh so easy, and look at her now !!!

On Wednesday, December 13, 2017 at 4:32:20 AM UTC-10, hmse...@xxxxxxx wrote:
Bill
Sorry that I am late to the discussion,
Based on what you would like to do,you might want to get in touch with
Randy's Ring and Pinion. I bought my bolt in sure grip to the ratio I wanted with all the new type of bearings and seals for my 62 Plymouth.
They spent a lot of time providing options and solutions. I kept the stock axles and brakes.
Contact below
Mark

Customer Service
1-800-347-1188
Custome...@xxxxxxxxxxxxxx
www.RingPinion.com



-----Original Message-----
From: Bill Young <byou...@xxxxxxxxxxxxx>
To: 1962to1965mopars <1962to19...@googlegroups.com>
Sent: Wed, Dec 13, 2017 1:56 am
Subject: RE: Fw: 62 Polara 741 rear end

I thank everyone for your replies to my query.  I have heard of “Green” bearings, I’ll google them to see info and where I can get them.  However, one of my goals is to make it an easy swap for a new owner to revert to the factory rear end if they desire.  So, getting a spare set of axles seems like the easiest for swapping third members between my stock and the sure grip.  I just want to have some fun with the car that I’m not having now.  I am familiar with driving a car with 4.11 rear gears and I miss that standing start thrill.  However, I’m looking for something a little more modest in the thrill department.  Something like 3.70 or 3.91.
 
Also, I like the idea of changing the complete rear end drum to drum, but it doesn’t work with my plan for easy retro-fit for a new owner or even myself if I choose to go back. 
 
Thanks,
Bill
From: 'rh' via The 1962 to 1965 Mopar Mail List Clubhouse [mailto:1962...@googlegroups.com]
Sent: Tuesday, December 12, 2017 7:28 PM
To: 1962to19...@googlegroups.com
Subject: Re: Fw: 62 Polara 741 rear end
 
...or put 'em both on Ebay
 
On Tue, Dec 12, 2017 at 5:27 PM, 'BCBOUND' via The 1962 to 1965 Mopar Mail List Clubhouse
....if you use the Green bearings in place of the stock roller axle bearings,  you can shit can both the adjuster and axle spacers
 
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
 
---
You received this message because you are subscribed to a topic in the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and all its topics, send an email to 1962to1965mopars+unsub...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.