Re: [Canadian] 318 Short Block ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Canadian] 318 Short Block ?



Neat I have one too still in the crate, did yours have paper work with it?

Bruce Toth

----- Original Message -----
From: ddavids <ddavids@xxxxxxxxxx>
To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Fri, 09 Feb 2018 07:13:35 -0500 (EST)
Subject: Re: [Canadian] 318 Short Block ?

Yesterday I took the top off the crate to get a better look at the block. Chrysler thoughtfully used only 4 nails to attach the top crate panel, leaving the heads about 1/4 inch above the surface for a nail puller. I guess the intent was for you to remove the top, cut the steel bands, and lift the block out with a hoist. I removed the clear plastic wrapping and verified the block as a 2532630, so it's a poly. I have to say it was pretty cool unwrapping something that was last touched by human hands 52+ years ago.

Turns out it is not actually a short block, as it is missing the crank, cam, and connecting rods. It does have all main caps and the rear seal.

As you can see from the photos, the crate is marked Rexdale, which is a district in Toronto.  Was this a Chrysler foundry or a full assembly plant?

The block does have pistons in the bores. Each one is ink stamped on top with either an A or a B. On one bank they line up A-B-B-A, while the other is A-A-B-B.   What does this signify?

Dan in Seattle




--

--

--

Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

 

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.

--

You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


---

You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.

To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.

For more options, visit https://groups.google.com/d/optout.


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.