Re: TTI Exhaust Tailpipe
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: TTI Exhaust Tailpipe




John,



When I putting the TTI exhaust on my car, from single to dual everything was included. All bolt up, no welding. Adding the muffler bracket to the right side did require removing the back seat to bolt through the body. Here are the muffler brackets & tail pipe brackets that came with the kit.



Nick Tiberio

Furyus63






On May 2, 2018 at 11:41 PM John Waskiewicz <jswask@xxxxxxx> wrote:

 

 

Sent from Mail for Windows 10

I have a few questions on this topic, my 64 sport fury with 361, 2 barrel and single exhaust needs a exhaust update. I bought a full TTI stock exhaust (2.5”) few years ago, so this year I'm putting it in. First question, as this is a single exhaust car, I need to add the muffler hanger bracket on the passage side that mounts to the floor. That will get welded on. Do I need to replace the stock one on the drivers side with the new one from the kit. Does the brake line bracket bolt on the new bracket. Also, at the rear tailpipe bracket that mounts to the frame, it seems like the frame is prepped with a hole and a slot, is there a clip that goes into it that the bracket bolts into as in the drivers side, if so who would carry it.Thank you John, having hard time sending pics, will retry if pics are needed. Thank you John Wask….

 


 

 


--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.

Attachment: MH-B25HA_detail.jpg
Description: JPEG image

Attachment: TPH-B2530.jpg
Description: JPEG image



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.