Hi Bob,
I'll echo what big Mike said, as I like my TTIs on my '64 big block Fury, but if I recall they were near $900, so it depends on your definition of arm and leg.
I can also add that if the criteria were "fits and cheap," I bought and installed a set of $200 Hedman Street Headers (P/N 78030) for start-up and break-in when I first built my engine, and was actually surprised at how well they fit (if you overlook that I probably lost 3 months off the end of my life breathing in the shipping paint as in burned off).
However, if one were to upgrade those headers to ceramic (P/N 78038) it might be considered a good value at $478. Just food for thought.
Thank you,
Jim
On Tuesday, July 3, 2018 at 6:53:02 AM UTC-4, Mike wrote:
Hi Bob,
Your request hinges on what your definition of "decent' means? I have Dougs and TTI brands, both up there in price and reputation. The Dougs are on my 66 Belvedere and fit like a glove. The TTIs are for my 65 Belvedere and I wasn't real happy with their fitment. The collectors were not aimed toward the frame notches so I had to modify both the collector extensions to get to the notches. They did clear everything though. This is all I can report on. Good luck.
Mike
On Mon, Jul 2, 2018 at 10:53 PM, 'Bob' via The 1962 to 1965 Mopar Mail List Clubhouse
<1962to19...@googlegroups.com> wrote:
I have a 64 Savoy, 440, auto trans.
Anyone know of a decent set of headers that will fit with out spending an arm and a leg?
Thanks