Re: 62 Plymouth 727 Stuck in 1st Gear after layup HELP
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 62 Plymouth 727 Stuck in 1st Gear after layup HELP



Hi Mark

I definitely think Mike is onto something. Rick Allison, the owner of A&A Transmission in Indy was nice enough to sort out some issues I had with my '63 Sport Fury. Rick is the best in the business when it comes to Torqueflites.  He found that I too had the wrong internal filter. It was listed by a very well know aftermarket manufacturer as fitting all TF's. 

If all else fails, you can find contact info for Rick on the 'net. He is a prince of a guy and I'm sure he would help.

Good luck,
Lyle

On Friday, April 12, 2019 at 8:42:25 AM UTC-4, MARK EVANS wrote:
Must be the time for Tranny troubles

Tried to take my recent restored 62 Plymouth SF with zero Miles for the first drive
It has been in heated storage for three months
I only have reverse and first gear
It will not shift out of first gear
The 727 is completely rebuilt with a new torque converter.
The shop that rebuilt it told me to roll back in reverse and shift into first to try and unlock it
I wanted to check with you guys before I tried that and if you know of a better solution other than pulling it
Any ideas ?
Mark Evans


Sent from my iPhone

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.