Re: 1962 Chrysler 383 Build Questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 1962 Chrysler 383 Build Questions



I can't tell you for certain on a 383 but one thing I did when building my 440 was go out to Summit Racing and search for ARP sets for my application.  I didn't necessarily purchase the sets but the part descriptions were often good enough to determine the needed fasteners.

Another tip: Tractor Supply sells Grade 8 bolts by the pound which ends up being way, way, way less expensive.  :-)

Jim

On Sunday, April 19, 2020 at 11:11:02 PM UTC-4, Matt Allyn wrote:
If any knows answers for any of the following; that would be grand!
  • Intake Manifold Bolts - I know there are 8.  Anyone know the sizes?  Some are longer due to the air conditioning brackets.
  • Water Pump Housing Bolts - I know there are 6.  Anyone know the sizes?
  • Thermostat Housing Bolts - Anyone know their size?
  • Valley Pan Cover Bar Bolts - I know there are 6 of them.  Anyone know what size they are?
  • Valve Cover Bolts - I have the 6 bolt covers.  Anyone know what size they are?
  • Exhaust Manifold Studs & Nuts - Anyone know what sizes are needed?  I know at least one of them is longer due to a bracket attaching to it

Thanks!
Matt Allyn
(562) 533-2551

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/add707f1-b742-447a-9d8a-5e64d4f2e98e%40googlegroups.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.