Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: Lower Ball joint

From: Joe Bump
Date: March 23, 2000
Time: 18:33:56


Sorry about the long delay got side tracked with new carb/torque converter/ headers (by Harold at Spit fire headers) will finish the front end allienment this weekend and hook up the break lines. preliminary eyeing of the excessive toe in do to the shorter nocl leads me to believe that the tie rod ends will need to be shortend and the adjusting turn bucle shortened by 1/4" at each end to allow for the new telemtry will let ya know.


Last changed: July 19, 2018