Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: Stripping paint

From: Brian Cooper


I think a paint roller MAY work the stripper too much. You only want to brush one way one time, so a roller may work it too much. Try it and see though. I used a four inch brush in an old pimiento cheese tub to apply it. I also had five layers of paint and two prime coats to go through so it took me a while! I didn't have the cajone's to use the stripper on my dash, in the car, with all that wiring and precious guages. I just sanded the one paint layer.


Last changed: July 19, 2018