Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Re: HELP!  Brake Drum Removal

From: Mike "Pony"Poniatowski
email: mikepony@prodigy.net

Comments

I used a rosebud tip on my torches and a BFH (big f_ _ _ ing hammer) to help ease em off while I had a friend keeping tension on the puller with an impact gun. If you have to do a lot of serious heating & pounding I would suggest making a spacer so that the puller isn't directly on the threaded shaft so it won't get mushroomed. Good luck.....Pony

 


Last changed: May 04, 2010