Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Re: HELP-Brake Drum Removal!!

From: John in WI
email: jrbartell@tds.net

Comments

I just went through this with my 59 Suburban...Heat...heat...heat.. .along with steady pressure..I had to heat and reheat a few times until the darn things let go. ps: I also twisted a drum and bent the axle. Apply heat before putting too much pressure on the drum with the puller... and only use the bolt on type pullers...the one that uses at least 3 of the 5 studs. good luck

 


Last changed: May 04, 2010