Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Ball Joint info. needed

From: Aaron
Email: aarong@weddington.com
Date: February 19, 2001

Comments

I am stuck in the middle of a 64 880 disk swap. Donor parts are from 76 Monaco (C-body). The 880 balljoints are too small. I have moved the 880's heavier/lower balljoint to the upper, taking care of that. The lower however needs an even larger taper/shank. The balljoint of a 60-66 Imperial (moog K727) has the correct stud but the threaded mount is too big for the control arm (upper and lower 880 holes being the same). Any body have a part number or model to swap with?

 


Last changed: May 04, 2010