Vote for The Forward Look Network on the Mopar Top 100 Sites 

Re: Brad what is the cfm of the afb's you are running?

From: Brad Harbold
Date: March 27, 2001



To be honest Im not sure, the carbs I use are the correct 58 AFB's that go on the 350 motor. If you can get a good deal on a pair of 600's give them a try, i assume you are going to use a cam at least equivalent or bigger then the factory dual fours cam. It is alot of cfm for a small block but you wont believe the difference. After a good tuning the upper end really comes alive.

Good luck



Last changed: July 19, 2018