Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Re: Dash trim

From: richard whelan (fintastic57)
Email: rgwhelansr@aol.com
Date: May 18, 2001

Comments

I made mine from 10-32 buttonhead screws and t-nuts. You have to grind down the heads of the screws after running them through the t-nuts so they will slide into the molding.Its easy to put the nuts on the back with the glove box out. Use regular 10-32nuts and washers to secure the trim. Hope this helps, DICK

 


Last changed: May 04, 2010