Re: I want to remove the 5/8" welch plugs to clean out the rocker...

From: MOE77
Email: MOE7707@veracom.net
Date: November 22, 2001

Comments

Drill a small hole and screw a wood screw into it then pray it out with a screwdriver or plyars, do this to both ends. The get a long pipe or tube clous it off at one end. put a wire on the shaft. Drop it on the pipe. Now fill the pipe with carb cleaner, let it set for 2-3 hrs. Pull it out clean off with solvant, blow dry w/air. Install new 5/8 plugs. MOEs gone