From: bob jones
Email: bjones@kktv11news
Date: December 09, 2001
How did the factory install rear power windows? I installed the fronts, they were easy. I cut the arm off a mid 60s Chrysler power window assy. and bored out the hole that was already in the quarter circle gear. I also used the stock rod, the new power window assy. was also installed in the stock location with new mounting holes. The back windows are a big problem. I thought to remove the crank assy. so it moves freely and put the power window assy. at the bottom and run a rod up to the quarter gear. But before I reinvent the wheel i would like to see how sombody else did it. The car is not stock.
[_borders/olddiscussion_aftr.htm]