Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Re: Carter carburetor adjustment, six cylinder

From: Brian Cooper
Email: 57plymouth@msn.com
Date: January 28, 2002

Comments

The service manual says to set the mix screw 1.5 turns out and then set idle to @800 RPM. I have mine idled higher, @1000 or so. To be honest, it sounds like your vacuum advance is either broken or the line to it is leaking. Check your choke function and set the idle a little faster and about 1/2 turn leaner. Worth a shot!

 


Last changed: May 04, 2010