Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Re: DeSoto Wheel Bolt Pattern

From: Hank Dozier
Email: dozierhc@aol.com
Date: February 25, 2002

Comments

Your bolt circle pattern should be the Chrysler standard of 5 x 4.5 inches. To measure, though, first measure the diameter of the wheel bearing hub hole. Divide that number by 2. Then measure from the outside edge of the hub hole to the center of one of the wheel stud holes. Add the two numbers, and multiply the result by 2 to get the bolt circle diameter.

 


Last changed: May 04, 2010