Vote for The Forward Look Network on the Mopar Top 100 Sites 
 


Re: Engine Mount Questions

From: ted vonwyl
Email: vonwyl@raex.com
Date: March 14, 2002

Comments

other than 57,58, and 59 im not sure if any others would fit,but you can alter the 301,318's to work.the only difference is the side of the mount with 2 holes needs to be cut off at the bottom hole and lenghened enough to drill a new hole a little farther apart than the 301,and 318.ill try to measure my 413 and my mounts from the 301 and let you know the difference in the space between the holes.

 


Last changed: May 04, 2010