|Vote for The Forward Look Network on the Mopar Top 100 Sites|
From: Jonny Milkshake
Remote Name: 188.8.131.52
Date: May 30, 2002
1964 Ply FuryIII rear end, bolts right in, no mods required. I tried a 1973 Chrysler New Yorker the first time and had to move the spring pads as well as have a larger u-joint installed onto the driveshaft, I went ahead and got rid of the yolk and trunnion in the front while I was at it. The problem with the 73 driveshaft was thet the track was about 3 inches longer than the original, it resulted in occasional tire/wheelwell contact while cornering.