Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: Exhaust to intake connection - Poly or 57/58 Manifold

From: Hank Dozier
Email: dozierhc@aol.com
Remote Name: 192.75.238.204
Date: September 05, 2002

Comments

Also be aware that the divorced choke poly and 57/58 manifolds have two small bolts to hold the choke assembly into the "heat cup" on the manifold. If these have been tapped, you need to plug them with exhaust sealant and appropriate size/thread allen set screws, since they are through-drilled into the exhaust crossover passage in the manifold. Otherwise, you will have an exhaust leak around the carburetor, and might not figure out quickly where the noise is coming from!

 


Last changed: May 04, 2010