|Vote for The Forward Look Network on the Mopar Top 100 Sites|
Remote Name: 22.214.171.124
Date: November 26, 2002
Hi Everyone! has anyone here installed the direct clutch piston with a new seal? I have tried and tried and it will not go. I checked the manual and have the lip of the seal facing away from the piston. There are no burrs on the drum's chamfer, everything is lubricated with lubriplate. i push, i turn, i push down and turn at the same time, and nothing! it will not go. i can see that the lip of the seal is only going about halfway down the chamfer. is there a tool that i need to make or use? it doesn't show one in the manual? help! Thanks in advance...