|Vote for The Forward Look Network on the Mopar Top 100 Sites|
From: Bob O.
Remote Name: 18.104.22.168
Date: December 13, 2002
Thanks for pointing that out, Kenny. I only look at those buttons a few times a week! I checked out my factory manual and I see the cable set-up only differs at the tranny end between Powerflites and Torqueflites, but there is definitely a difference in how to adjust the shifter mechanism. Again, if anyone is interested, I've written down the procedure I used, and added a couple of notes to (I hope) cover the Powerflites. My shifting problems were cured by lubing the cable and then adjusting the shifter.