Vote for The Forward Look Network on the Mopar Top 100 Sites 


Re: TORSION BARS

From: Mike B
Email: saukriversetters@isomedia.com
Remote Name: 206.63.254.41
Date: March 27, 2003

Comments

There were stock factory bars for your car, but they were rarely installed on any but Station Wagons and Police cars, so thats what you should look for in the boneyards. Previous discussions on this site relating to these stock bars came to the general conclusion that the stock bars were too thin to do a very good job, and that their somewhat different attach point on the struts was unconventional. The original mountin hardware should be looked at for familiarity purposes when you go to put on a bigger unit from the B body or C body cars.

 


Last changed: May 04, 2010