Vote for The Forward Look Network on the Mopar Top 100 Sites 


Ignition upgrade

From: Chuck
Email: chuck34frd@AOL.com
Remote Name: 198.81.26.102
Date: April 23, 2003

Comments

Does anyone have a schematic to hook up an electronic ignition on a '56 poly?? Mopar muscle did an upgrade about a year ago and did not include a schematic. They did on a '68 Barracuda and used a single resistor. The resistor i got from the auto parts store is a dual with a 5 ohm side and a 1.5 ohm side. They tell me you need the dual to make the system work?? The mopar article cut off the green/red stripe wire and used a single resistor. Anyone have a schematic/solution??? Thanks

 


Last changed: May 04, 2010